Hello Guest it is March 29, 2024, 03:44:02 AM

Author Topic: PMDX122 + CSD205-H stepper driver!  (Read 2446 times)

0 Members and 1 Guest are viewing this topic.

Re: PMDX122 + CSD205-H stepper driver!
« Reply #10 on: January 19, 2019, 09:06:24 AM »
Hi again,
             Where do I wire the "hold off" of CSD205-H to which terminal of PMDX?


THX,

Offline TPS

*
  •  2,501 2,501
    • View Profile
Re: PMDX122 + CSD205-H stepper driver!
« Reply #11 on: January 19, 2019, 09:14:24 AM »
cou can connect it to pin14, and Setup->Port'S&Pin's -> Outputs -> Enable to pin14
anything is possible, just try to do it.
if you find some mistakes, in my bad bavarian english,they are yours.
Re: PMDX122 + CSD205-H stepper driver!
« Reply #12 on: January 19, 2019, 09:18:05 AM »
Thanks TPS!