Hello Guest it is July 07, 2020, 03:17:58 PM

Author Topic: maximum work area  (Read 711 times)

0 Members and 1 Guest are viewing this topic.

Re: maximum work area
« Reply #10 on: December 29, 2018, 01:38:16 PM »
I am not seeing any messages in the history file. I am aware Lazy Cam randomly inserts junk in the file but I am not even seeing that.
Re: maximum work area
« Reply #11 on: December 29, 2018, 04:26:40 PM »
Making headway, got this message in the history file- R i j k words all missing for arc , Block = N2505 Z0.0000
Line 500
Re: maximum work area
« Reply #12 on: December 29, 2018, 09:21:09 PM »
Hi,

Quote
Block = N2505 Z0.0000
Line 500

I am suspicious, that message suggests that you have line number increment of five. Thus the line N2505 is the 501'st line in the file.
Double check the licence status of your installation. The Help/About Mach3 CNC Controller tab will tell you to whom the installation is licenced.
I suspect its in Demo mode......maybe your licence file is missing or corrupt. But that error message all but determines that you are in Demo mode.

Craig
My wife left with my best friend...
     and I miss him!
Re: maximum work area
« Reply #13 on: December 30, 2018, 01:44:24 PM »
Checked and the license IS licensed to me as it should be. I could agree with the numbering if the first line in the file weren't number 5
Re: maximum work area
« Reply #14 on: December 30, 2018, 02:08:05 PM »
Hi,
there is something wrong, the machine is bailing out after 500 lines, its behaving as if its in demo irrespective of your licence.

Time to contact NFS.

Craig
My wife left with my best friend...
     and I miss him!