Hello Guest it is March 28, 2024, 08:51:18 PM

Author Topic: Calibrating spindle reversed?  (Read 1264 times)

0 Members and 1 Guest are viewing this topic.

Calibrating spindle reversed?
« on: December 14, 2018, 12:55:17 AM »
Hi There

I tried to calibrate my spindle last night.

But the calibration was reversed.   speed 24000  actual spindle 0 RPM
how do I adjust this.

Thanks for your input

Offline ger21

*
  • *
  •  6,295 6,295
    • View Profile
    • The CNC Woodworker
Re: Calibrating spindle reversed?
« Reply #1 on: December 14, 2018, 07:03:42 AM »
What hardware are you using to control the speed, and what VFD?
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html
Re: Calibrating spindle reversed?
« Reply #2 on: December 14, 2018, 09:28:13 AM »
I'm using a Veichi AC70

I managed to solve it.
Now I'm missing RPM's in Mach, but speeds are correct when using the S command.

 
Re: Calibrating spindle reversed?
« Reply #3 on: December 23, 2018, 02:07:21 PM »
I'm having the same problem with NVMC6 2.1, RPM % control gives me opposite reaction of spindle speed (100%->OV on breakout board, 0% gives me 10V).
Any idea on how I can correct that?