Third party software and hardware support forums. > HiCON Motion Controller

Spindle Not Turning Clockwise - Mach4 & HiCon

(1/1)

adrapp:
Hello All, I need some help, please be patient with me I've had this machine for under a year.

The Spindle won't spin Clockwise, there must be something in the software (or a certain configuration) that is preventing the machine from running Clockwise.

When I operate the machine (Viper XP CNC Machine) manually, I can get the spindle to spin both directions. Then when I set to auto and operate through the software, the spindle rotates Counter-Clockwise and doesn't spin the other direction at all. It will go through the processes if I assign a G-Code EXCEPT SPINDLE TURNING CLOCKWISE. Everything else works fine.

Can somebody help me with this?

Vital System Support:
Hello,

The ViperXP machine is sold by CNC Factory. Although we have sold them the motion controller for the machine, we do not provide support directly for that product. We recommend you contact the tech support team at CNC Factory for support.

Navigation

[0] Message Index