Hello Guest it is January 28, 2020, 08:10:21 AM

Author Topic: Issues with VistaCNC P2-S USB pendant and Mach4  (Read 676 times)

0 Members and 1 Guest are viewing this topic.

Re: Issues with VistaCNC P2-S USB pendant and Mach4
« Reply #10 on: November 12, 2019, 11:18:33 AM »
I flashed it back to the Mach 3 firmware on the VistaCNC site and had the same problem with Mach 3.    It turns out that the firmware on the site is not compatible with my P2S which I purchased in 2013.

Lee got me sorted out. He sent me a compatible firmware for Mach 3 and now I have it working again with Mach 3. 

My old CNC computer with Win7 and a parallel port died recently, so I migrated to a Win10 computer and an ESS and figured what the heck, I'll upgrade to Mach 4 too....  But I had no good reason to upgrade to Mach 4 and I can't imagine life without a pendant, so I guess I'll stick with Mach 3 for now so I don't have to buy a new pendant.