Hello Guest it is October 16, 2019, 09:15:19 PM

Author Topic: can any one help me to config mach3  (Read 238 times)

0 Members and 1 Guest are viewing this topic.

can any one help me to config mach3
« on: October 23, 2018, 07:46:14 PM »
Hello to all and sorry for my bad english

So here is the problem
I have a desktop mill and I had to open the control box to check the spindle inverter and i found that there is a spindle conection on my control board

I have not been able to config mach3 to activate the spindle output

I am using the rnr eco motion pulgin to ake the machine move

thanks for your help