Hello Guest it is March 28, 2024, 06:29:27 PM

Author Topic: Help Can't get steppers to move!!!  (Read 24082 times)

0 Members and 1 Guest are viewing this topic.

Offline rcaffin

*
  •  1,052 1,052
    • View Profile
Re: Help Can't get steppers to move!!!
« Reply #50 on: October 17, 2018, 10:59:23 PM »
The Mach3Mill_1.84.pdf manual covers this fully. You will need to first calibrate the axis for movement.
Caution: while the manual does cover just about everything, it very often covers it just ONCE. You need to read the manual very carefully, and skip nothing.

Cheers
Roger
Re: Help Can't get steppers to move!!!
« Reply #51 on: October 18, 2018, 12:09:56 AM »
Noted Roger.
I plan to do router table first and want to proceed to laser finally.
Reading the manual will take some time for me.