Author Topic: Panasonic Digital Fiber Sensor Amplifier FX-501-C2  (Read 404 times)

0 Members and 1 Guest are viewing this topic.

Offline qiwating

  • Holding
  • Posts: 2
    • View Profile
    • Programming Logic Controller
Panasonic Digital Fiber Sensor Amplifier FX-501-C2
« on: September 16, 2018, 03:38:57 AM »
Panasonic Digital Fiber Sensor Amplifier FX-501-C2
https://panasonic-plc.com/fx-501/
Type      Standard type   2-output type   Cable type
Model number   NPN output   FX-501   FX-502   FX-505-C2
PNP output   FX-501P   FX-502P   FX-505P-C2
Supply voltage      12 to 24V DC % (+10%/-10%), ripple P-P10% or less
Power consumption      Normal operation: 960mW or less (current consumption 40mA or less at 24V supply voltage) Eco mode: 680mW or less (current consumption 28mA or less at 24V supply voltage)
Response time      H-SP: 25μs or less, FAST: 60μs or less, STD: 250μs or less, LONG: 2ms or less, U-LG: 4ms or less, HYPR: 24ms or less
Cable      Cables are not supplied with the product. Select cables from the table below,   0.2 mm2 6-core cab tire cable, 2m
Weight (main body only)      Approx. 15g   Approx. 60g
Accessory      FX-MB1 (Amplifier protection seal): 1 set.