Hello
Guest
it is
March 29, 2024, 02:20:53 AM
Guest
Login
Register
Menu
Home
Help
Search
Calendar
Members
Members
View the memberlist
Search For Members
Login
Register
YouTube
Machsupport Forum
/
Mach Discussion
/
General Mach Discussion
/
Mach3 and LazyCam Pro
« previous
next »
Print
Pages:
«
1
2
Go Down
Author
Topic: Mach3 and LazyCam Pro (Read 7134 times)
0 Members and 1 Guest are viewing this topic.
Chaoticone
5,624
Precision Chaos
Re: Mach3 and LazyCam Pro
«
Reply #10 on:
July 28, 2007, 05:38:59 AM »
At the top of this page in the Tutorials section, video tutorials, down toward the bottom. Two videos there should help you.
Brett
Logged
If you could see the things I have in my head, you would be laughing too.
My guard dog is not what you need to worry about!
vmax549
Re: Mach3 and LazyCam Pro
«
Reply #11 on:
July 28, 2007, 06:58:14 PM »
When you import your drawing you need to seperate all the different depths of cuts into different layers. Then assign the layer depth of each one. DO NOT USE SET ALL LAYERS as it will set ALL layers to that depth. Just input the proper depth of each layer and push "SetLayer". This sets only the layer you are working in. That way you can control the depth of each and every layer.
(;-) TP
Logged
Chaoticone
5,624
Precision Chaos
Re: Mach3 and LazyCam Pro
«
Reply #12 on:
July 28, 2007, 08:26:26 PM »
Yeah, what he said. Yeah, yeah, thats the ticket.
Brett
Logged
If you could see the things I have in my head, you would be laughing too.
My guard dog is not what you need to worry about!
Print
Pages:
«
1
2
Go Up
« previous
next »