Hello Guest it is January 21, 2021, 10:37:34 PM

Author Topic: Can't get mach 3 to drive the machine after re-load  (Read 1056 times)

0 Members and 1 Guest are viewing this topic.

Offline ger21

*
  • *
  •  6,287 6,287
    • View Profile
    • The CNC Woodworker
Re: Can't get mach 3 to drive the machine after re-load
« Reply #10 on: July 31, 2018, 08:52:02 PM »
If the drivertest won't run, then Mach3 won't run.


Must be something on that PC causing it to not work.
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html