Hello Guest it is May 15, 2021, 02:28:56 PM

Author Topic: ISIG_DIGITIZE  (Read 667 times)

0 Members and 1 Guest are viewing this topic.

« on: June 26, 2018, 12:40:30 PM »
in mach scripting manual there sample of probe cycle
the input signal is:   ISIG_DIGITIZE
but in there help manual there the list of all signal but no such signal name
and the probe signal input is:ISIG_PROBE

the signal is very iportant  i can use other input because the use of G31
« Reply #1 on: June 26, 2018, 04:51:51 PM »
its actually the motion controller/BoB that does the probing, or least the time critical parts of it.
To my knowledge ALL the motion controller manufacturers have used ISIG_PROBE name of the
probe input pin.

DIGITIZE was a term that came from Mach3, I don't recall ever seeing it in Mach4 or any Mach4 documentation.

My wife left with my best friend...
     and I miss him!
« Reply #2 on: June 26, 2018, 04:56:52 PM »
The probe input was named ISIG_DIGITIZE in earlier versions of Mach4, but was later renamed to ISIG_PROBE. This relates to G31.0. G31.1-3 are similarly now given the more intuitive names of ISIG_PROBE1 to ISIG_PROBE3.

These are defined in machine.ini