Hello Guest it is May 27, 2019, 05:43:40 AM

Author Topic: Underlined DRO's  (Read 595 times)

0 Members and 1 Guest are viewing this topic.

Underlined DRO's
« on: March 25, 2018, 03:14:53 PM »
This is kind of a strange one.
Just finished a new Screen and all of the DRO's are underlined.  But on the computer I was designing and testing the new screen, there are no underlined DRO's.  And on the computer running the CNC, the old screen set did not have any underlined DRO's. 

I'm using R3.042.040

I can live with it, but the rest of the screen looks so good.

Thanks for any help.
Rick

Offline ger21

*
  • *
  •  6,234 6,234
    • View Profile
    • The CNC Woodworker
Re: Underlined DRO's
« Reply #1 on: March 25, 2018, 04:40:38 PM »
Boxed DRO's and Graphics in General Config.
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html
Re: Underlined DRO's
« Reply #2 on: March 25, 2018, 05:18:16 PM »
Thank you Gerry.
I was hoping it was something easy like that.
Rick