Hello Guest it is March 29, 2024, 05:29:40 AM

Author Topic: Rotating tool path  (Read 1133 times)

0 Members and 1 Guest are viewing this topic.

Rotating tool path
« on: March 15, 2018, 01:07:21 PM »
Hi all,

I am coming from WinPC NC and just started to use MACH4.
From the WinPC interface I have the option to rotate the tool path in 90° steps to align it on the workarea.

Am I not seeing this option in MACH or is it not possible?

Thanks for your help!
Re: Rotating tool path
« Reply #1 on: March 15, 2018, 01:43:53 PM »
Hi,
try looking up G68.

Craig
'I enjoy sex at 73.....I live at 71 so its not too far to walk.'