Hello Guest it is June 24, 2021, 03:28:07 PM

Author Topic: Large Calibration Numbers- Opinions?  (Read 1882 times)

0 Members and 1 Guest are viewing this topic.

Re: Large Calibration Numbers- Opinions?
« Reply #10 on: February 01, 2018, 09:16:52 AM »
Thanks guys!

Russ- yah, I thought about the setting thing and logically you are right. But I swear I checked and re-checked.....that being said, I'm goinna try the other direction and see.....and call the supplier just in case.

We ran the machine last night and it is accurate but slower than what I've built before.
Re: Large Calibration Numbers- Opinions?
« Reply #11 on: February 01, 2018, 03:48:49 PM »
Why is it that when you're in front of something for too long you stop "seeing". Making too many changes all at once- slides, drivers, bob, etc.
Yup, diip switches go the other way!

All is good and it's with great humility I say thank you.

Ian


Now, how to straighten the 9 foot bow in the bed...
Re: Large Calibration Numbers- Opinions?
« Reply #12 on: February 01, 2018, 05:17:36 PM »
You're very welcome Ian, I'm happy that fixed it.
As mentioned earlier, and if you haven't already, make sure that current limiting DIP switch selection is in fact what you want.
Inadvertently set too high could do damage, and too low would rob you of available torque.
Cheers !
Russ

Offline Chaoticone

*
  • *
  •  5,626 5,626
  • Precision Chaos
    • View Profile
Re: Large Calibration Numbers- Opinions?
« Reply #13 on: February 01, 2018, 05:44:15 PM »
 :)
;D If you could see the things I have in my head, you would be laughing too. ;D

My guard dog is not what you need to worry about!