Hello Guest it is March 28, 2024, 08:08:19 AM

Author Topic: Homing after work has completed  (Read 3445 times)

0 Members and 1 Guest are viewing this topic.

Homing after work has completed
« on: July 05, 2007, 07:27:36 PM »
probably another stupid question. After my work is done and I want to go with all Axis to the Machine Coordinates Zero (Home) how do I do that? Without disabling soft limits or jogging ?

vmax549

*
Re: Homing after work has completed
« Reply #1 on: July 05, 2007, 10:41:21 PM »
If all else fails from the main screen push the softlimits button to turn them off and then push the refhome button. THat works most of the time(;-) TP

Offline stirling

*
  • *
  •  2,188 2,188
  • UK
    • View Profile
    • www.razordance.co.uk
Re: Homing after work has completed
« Reply #2 on: July 06, 2007, 04:31:06 AM »
don't know the full ins n outs but G28 works for me
Re: Homing after work has completed
« Reply #3 on: July 09, 2007, 09:28:53 PM »
Try this
G53 G0 Z0.0
G53 G0 X0.0 Y0.0

That should do it

Thanks
Brian
Fixing problems one post at a time ;)

www.newfangledsolutions.com
www.machsupport.com

vmax549

*
Re: Homing after work has completed
« Reply #4 on: July 09, 2007, 09:32:39 PM »
Or you could just push the home button on the keyboard (;-) TP