Hello Guest it is March 29, 2024, 02:30:17 AM

Author Topic: Are the G Codes at the top right of the main screen all the active codes?  (Read 1534 times)

0 Members and 1 Guest are viewing this topic.

I assume the codes at the top right of the main screen are the ones that are active. Correct?

Why would g97 and g94 be active for a mill program? I assume g97 and g94 are for turning applications.

Thanks,

Billy

Offline ger21

*
  • *
  •  6,295 6,295
    • View Profile
    • The CNC Woodworker
Re: Are the G Codes at the top right of the main screen all the active codes?
« Reply #1 on: December 29, 2017, 07:07:35 PM »
G94 would be the standard mode for Mill. Alternatively, you could use G93.

I don't know what G97 is, as it's not listed in either the Mach3 Mill or Lathe manuals.
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html

Offline Tweakie.CNC

*
  • *
  •  9,196 9,196
  • Super Kitty
    • View Profile
Re: Are the G Codes at the top right of the main screen all the active codes?
« Reply #2 on: December 30, 2017, 02:11:01 AM »
Just in case anyone is curious about the G97…

Constant Surface Speed never really worked correctly in Mach3 and it’s implementation was eventually discontinued. Having the G97 active ensures the spindle will be operating in RPM mode.

Graham Waterworth describes the relevant commands in this thread; http://www.machsupport.com/forum/index.php/topic,5494.msg37162.html#msg37162

Tweakie.
PEACE