Author Topic: DRO not accepting inout  (Read 134 times)

0 Members and 1 Guest are viewing this topic.

Offline Wasteofspace

  • Active Member
  • Posts: 13
    • View Profile
DRO not accepting inout
« on: February 13, 2019, 10:30:44 PM »
I recently had a catastrophic failure of the HDD while running the CNC.

It is years since I originally set the machine up and I have not needed to change any settings since then.

However, the XLS file was also lost and I have had to start from scratch again.

I have got almost everything running again, but  I now have a problem with which I am unfamiliar. The DROs refuse to accept any revisionist input from me.

I click on the DRO, I enter the number I want to see there and then press enter. The DRO just goes back to whatever was there before.

I have gone through all the settings I can think of, but the DROs still won't accept my input.

Does anybody have any idea what I may have changed/not changed?

I am running Windows 7 with the memory mod and the latest Mach3
Jeremy Robert (Bob) Willson