Author Topic: Mastercam 2018 Mach3 postprocesor  (Read 328 times)

0 Members and 1 Guest are viewing this topic.

Offline ryghar

  • Active Member
  • Posts: 4
    • View Profile
Mastercam 2018 Mach3 postprocesor
« on: November 12, 2018, 07:36:15 AM »
Hello,

Can anyone help me to configure Mastercam 2018 to worrk with Mach3 3axis?
I found a post naming the file Boss_Mach3.txt but I cant find it, the link is broken.

Thank you so much!!!

Offline Tweakie.CNC

  • Global Moderator
  • *
  • Posts: 7,646
  • Super Kitty
    • View Profile
    • Tweakie.CNC
Re: Mastercam 2018 Mach3 postprocesor
« Reply #1 on: November 12, 2018, 07:58:31 AM »
Hi Ryghar,

The forum is currently having some issues with links - hopefully it will all be fixed soon.

In the meantime this is the corrected link you have referred to;  http://www.machsupport.com/forum/index.php/topic,1306.msg7315.html#msg7315

Tweakie.
« Last Edit: January 09, 2019, 03:06:05 AM by Tweakie.CNC »
Success consists of going from failure to failure without loss of enthusiasm.  Winston Churchill.

Offline ryghar

  • Active Member
  • Posts: 4
    • View Profile
Re: Mastercam 2018 Mach3 postprocesor
« Reply #2 on: November 12, 2018, 08:18:19 AM »
Excellent!!

Thanks!!

Offline asuratman

  • Active Member
  • Posts: 7
    • View Profile
Re: Mastercam 2018 Mach3 postprocesor
« Reply #3 on: January 01, 2019, 11:10:56 PM »
I saw on utube, you can migrate from mastercam X7 to mcamx17 then to mcamx18. Have you tried this one ? Successful ?