Hello Guest it is September 21, 2023, 04:26:55 AM

Author Topic: Smoothstepper ESS and CNC4PC seems to have no signals to stepper drivers  (Read 3481 times)

0 Members and 1 Guest are viewing this topic.

Try as I might seems like the signal strength isn't there.  plenty of 5 volt power and set only the 1st port to power also the second.  Could this be a stepper driver problem?  Ordered a BOB today, my old C-10 stopped after adding a 4th axis.  Thought it could be a resonance problem but more likely not.  Ordered gecko steppers to replace the Keling K5056-D and the K-8070-D.  Also thought it could be a recent recent windows 10 upgrade.  All lights are correct.  The ESS pings. 
Any thoughts?