Hello Guest it is March 28, 2024, 06:35:38 PM

Author Topic: UC100 question  (Read 1688 times)

0 Members and 1 Guest are viewing this topic.

UC100 question
« on: September 10, 2017, 10:35:13 AM »
Hi Everyone, I want to purchase a UC100 so that I can use my cnc using the UC100 instead of a parallel port. I saw a few of them on ebay and amazon at a reasonable price. When I went to the CNCZone website they are saying that the UC100 on ebay, amazon and other websites are knockoffs and if you purchase them it will not work with the UC100 drivers on the CNCZone website. In fact the UC100 on the CNCZone is almost triple the price compared to other websites. It looks like they are pushing their product on their site. Has anyone in this forum purchased a UC100 lately. If so where can one find a reasonably priced UC100.

Thx
Vince
Re: UC100 question
« Reply #1 on: September 10, 2017, 02:41:38 PM »
Hi,
why not go to the CNCdrive website and buy direct from the manufacturer?

If you nervous about getting ripped by a Chinese made copy then consider PMDX-411 or PoKeys 57cncd25, they are almost identical and can
be bought direct.

Craig

http://www.cncdrive.com/
http://www.pmdx.com/PMDX-411
https://www.poscope.com/product/pokeys57cncd25/
'I enjoy sex at 73.....I live at 71 so its not too far to walk.'

Offline ger21

*
  • *
  •  6,295 6,295
    • View Profile
    • The CNC Woodworker
Re: UC100 question
« Reply #2 on: September 11, 2017, 08:49:20 AM »
A UC100 should cost roughly $125. If it's a lot cheaper, it's a chinese knockoff, and not a real UC100.

If you are in the US, but from CNC4PC, or Automation Technologies. In other parts of the world, buy from CNC Drive directly.
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html