Hello Guest it is November 11, 2019, 08:09:17 PM

Author Topic: K2 CNC only jogging one way  (Read 656 times)

0 Members and 1 Guest are viewing this topic.

K2 CNC only jogging one way
« on: July 10, 2017, 06:02:52 PM »
I've a K2 CNC that I just put back up, when I go to jog any of the axis's they only move one way. I tried changing the hotkeys and that didn't seem to help...

Any ideas?

Thanks
-Paul-
-Paul-

Paul Davis
Luthier
Patriot Guitars
Re: K2 CNC only jogging one way
« Reply #1 on: July 11, 2017, 12:58:23 PM »
can you use the built in mpg to jog(hit 'tab' then try the arrows?)

Offline rcaffin

*
  •  1,003 1,003
    • View Profile
Re: K2 CNC only jogging one way
« Reply #2 on: July 12, 2017, 07:03:27 PM »
Sounds as though the DIR pins are not set up correctly.

Cheers
Roger