Hello Guest it is March 28, 2024, 04:43:50 PM

Author Topic: Rapid movements  (Read 2748 times)

0 Members and 1 Guest are viewing this topic.

Rapid movements
« on: June 20, 2007, 08:15:20 AM »
Any ideas why the machine rapid moves are all of a sudden so fast the machine loses position?  Works great for months and now the G00 moves are incredibly fast.  I checked the tuning and the profiles are what they always have been since I set up the machine.

Dan
Re: Rapid movements
« Reply #1 on: June 20, 2007, 12:52:41 PM »
I think I found the problem.  The programs I run have a lot of lines of code.  Usually well over 100,000 lines.  It seems that displaying the tool path takes up way too much system resources and the controller starts doing weird stuff.  So I will test it again later with the tool path display off and see what happens.

Dan
Re: Rapid movements
« Reply #2 on: June 20, 2007, 11:16:19 PM »
No that wasn't it  :(