Hello Guest it is November 20, 2019, 03:45:56 PM

Author Topic: mach3 run time  (Read 972 times)

0 Members and 1 Guest are viewing this topic.

mach3 run time
« on: April 19, 2017, 03:41:21 PM »
Is it possible for Mach3 (full version) to report estimated run time for a file?
Re: mach3 run time
« Reply #1 on: April 19, 2017, 03:57:05 PM »
Yes, on the Toolpath Tab(alt 4) there is a button labled 'Simulate program run' which will simulate the loaded gcode and report the estimated time below.  Not exactly accurate but close.

HTH

RT
Re: mach3 run time
« Reply #2 on: April 19, 2017, 04:01:28 PM »
Thanks for the info.
Re: mach3 run time
« Reply #3 on: April 20, 2017, 02:02:28 PM »
Is there a similar function in mach3 turn?
Re: mach3 run time
« Reply #4 on: April 20, 2017, 02:14:09 PM »
Not in the stock screens.  You would have to use a screen editor like MachScreen to add the button and dro Both Standard Code 15.  there may be a commercial turn set that has it but i have never looked.

HTH

RT