Hello Guest it is March 28, 2024, 06:46:14 AM

Author Topic: Mach3 + Galil DMC2133  (Read 4388 times)

0 Members and 1 Guest are viewing this topic.

Mach3 + Galil DMC2133
« on: April 04, 2008, 03:03:28 AM »
Hi all,

I am having Galil DMC-2123 controller with onboard AMP 20540 drive & pittman motors. I want to use MACH3 for 2 axis truning job application where i am going to retrofit a OLD manual lath.

I have downloaded MACH3 & pluging for Galil controller, they are communicating very well but my problem is i want to configure AXIS of Galil controller with Mach3 for turn application.

For example i want to used X & Z axis for turn application how can i do it.
Please advice.

Thanks
Manoj

Offline smurph

*
  • *
  •  1,544 1,544
  • "That there... that's an RV."
    • View Profile
Re: Mach3 + Galil DMC2133
« Reply #1 on: April 09, 2009, 05:12:48 PM »
The new Galil plugin (V4.0) allows axis mapping.  It will do what you are wanting to do.  You can download this new version on the plugin download page.  Read the documentation, as there are a few things that are different from the V3.0 plugin.

Steve