Hello Guest it is November 03, 2024, 08:51:31 AM

Author Topic: machine is out by .5mm in x and y axis even after setup  (Read 4641 times)

0 Members and 1 Guest are viewing this topic.

Re: machine is out by .5mm in x and y axis even after setup
« Reply #10 on: March 02, 2017, 05:34:29 PM »
Tried what you said and i can repeat it accurately for movement to 1000mm but when machining again its out by .3mm. This is strange.
Re: machine is out by .5mm in x and y axis even after setup
« Reply #11 on: March 03, 2017, 04:41:33 AM »
may I kindly ask anyone to write a simple code for a square that measures 50mm x 50mm at 2mm deep with a 6mm endmill, zeroed bottom left corner. may be worth seeing if its a coding error from Artcam when being created

Offline Tweakie.CNC

*
  • *
  •  9,243 9,243
  • Super Kitty
Re: machine is out by .5mm in x and y axis even after setup
« Reply #12 on: March 03, 2017, 05:11:43 AM »
Try this.

Tweakie.
PEACE
Re: machine is out by .5mm in x and y axis even after setup
« Reply #13 on: March 03, 2017, 05:12:44 AM »
thank you sir, will try it later today after work. much appreciated