Hello Guest it is December 07, 2024, 03:36:52 PM

Author Topic: New to mach  (Read 1583 times)

0 Members and 1 Guest are viewing this topic.

New to mach
« on: February 27, 2017, 06:01:19 PM »
Dear all
As  I am new Mach I have a simple question
I am developing a sewing machine for my customised needs. As of now the issue with me is I need to operate two motors in X & Y axis another two motors need to be at fixed place these will be only engaged when stitching is required. Another motor is required when the the whole stitching process is completed it will be connected to rollers to move the fabric from work area as we are using roll fabric roll size is 30 metres and work area is 2/2 metres.
Hence  at my work area thr are totall 4motors which will work during stitching. One for rollers now that means thr is some time duration which we need to calculate for roller motor

Is this possible in mach software with CNN.

Thankful