To change to a different screen set you use
- View>Load Screens
- On the fly out you select which type of screen set you wish to use.
There are Mill screens and they have the extension ".set" and there are
Lathe screens and they have the extensiion ".lset". You just click the arrow and you will see the choices.
- Click Open and and you will see what .set or .lset are available.
The Turn Wizards reside in the TurnAddons folder.
Id like to change to a screen that has 3 axis dros. I am lathing on mill
I have never done lathe work on the mill. I would suggest a specific profile
if i was doing what you are so that the desired screen and wizards would be available.
Depending on the tool to be used, note that there is a difference in the tool tables of lathe and mill. ALso there are two modes in the lathe
namely radius and diameter.
Note that for the lathe, the right hand rule still applies but you are looking from a different view in ZX, so generated code from the wizard may require reversing of the arc's and there may be other issues.
Have Fun and will say that a mill is not a Lathe...............
RICH