Hello Guest it is September 27, 2023, 12:43:27 AM

Author Topic: Position Loss Issue  (Read 1301 times)

0 Members and 1 Guest are viewing this topic.

Position Loss Issue
« on: February 10, 2017, 04:08:24 AM »
hi all,

What i've done so far to drive my metric Sherline mill is to install UC100 + Mach3 on my desktop and then used the XML file for sherline metric off the ftp.machsupport.com/XMLs but when I run test code to cut a simple profile such as a square I get very bad loss of position every cycle:

Anybody able to help me troubleshoot this issue? I'm helpless, and have disassembled the mill a number of times to check backlash and what not...


Offline Tweakie.CNC

  • *
  •  9,111 9,111
  • Super Kitty
    • View Profile
Re: Position Loss Issue
« Reply #1 on: February 10, 2017, 05:23:11 AM »
Try reducing your Velocity and Acceleration in Motor Tuning by 50 % for your X and Y axes (saving the changes for each axis).

Does your machine still loose position ?