Sorry to say but you cannot use the LPT printer port with windows 10.
Requirements if using the parallel port for machine control:
Desktop PC (Laptops are not supported) with at least one parallel port
32-bit version of Windows 2000, Windows XP, Windows Vista, or Windows 7 (64-bit versions will not work)
1Ghz CPU
512MB RAM
Non-integrated Video Card with 32MB RAM(Large G-code files, especially 3D files will require a video card with 512MB RAM or higher)
If you need to use Win10 then you will have to use an external motion controller (Smooth Stepper, etc.)
Tweakie.