Hello Guest it is March 28, 2024, 08:58:24 AM

Author Topic: Pull-up Resistors  (Read 4888 times)

0 Members and 1 Guest are viewing this topic.

Pull-up Resistors
« on: July 22, 2007, 10:51:56 PM »
Hello,
Can someone please direct me to information on pull up resistors?

Thank you,

Ken

Offline Chip

*
  • *
  •  2,055 2,055
  • Gainesville Florida USA
    • View Profile
Re: Pull-up Resistors
« Reply #1 on: July 22, 2007, 11:36:07 PM »
Hi, Ken

I think theres a description on the Rutex web site.

There tied to the A & B lines then to 5 volts TTL encoders, Around 470 ohm's, Hears the link to look at,

http://www.rutex.com/pdf/R9xHbdi.pdf   , page 7.

Hope this Helps, Chip

Offline Jeff_Birt

*
  •  1,107 1,107
    • View Profile
    • Soigeneris
Re: Pull-up Resistors
« Reply #2 on: July 26, 2007, 03:47:16 PM »

Quote
Can someone please direct me to information on pull up resistors?

Ken, that's a pretty wide open question.  What are you trying to accomplish, hook up etc?  If you can give us an idea of what you are trying to do, then perhaps someone can tell you how pull-up resistors relate to that subject.
Happy machining , Jeff Birt
 

Offline comet

*
  •  336 336
    • View Profile
Re: Pull-up Resistors
« Reply #3 on: July 26, 2007, 04:25:05 PM »
hi,
 I will asume you are refering to encoders? in which case you should refer
to the manufacturer of the encoder's specsheet.