Hello Guest it is December 12, 2019, 02:44:01 PM

Author Topic: Z-Plate is grounded!  (Read 3450 times)

0 Members and 1 Guest are viewing this topic.

Re: Z-Plate is grounded!
« Reply #10 on: December 26, 2016, 02:06:41 AM »
Hi,
my understanding is that Mach3 development/bug fix has ceased. I think the version your using is the latest 'stable' version,
I've been using the same version for several years. Have dipped my toes in Mach4 waters...

Craig
My wife left with my best friend...
     and I miss him!

Offline ger21

*
  • *
  •  6,291 6,291
    • View Profile
    • The CNC Woodworker
Re: Z-Plate is grounded!
« Reply #11 on: December 26, 2016, 07:28:24 AM »
Yes, and the latest "stable" version is known to be far from stable.
First thing I'd try is go back to 3.043.062.
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html
Re: Z-Plate is grounded!
« Reply #12 on: December 27, 2016, 07:38:03 PM »
I put a 4.7kOhm resistor from the pin to a 5V source and that took care of the problem thank you very much.