0 Members and 1 Guest are viewing this topic.
We are glad to announce the new Ease-eTurn for Lathe Screenset!This thing turns your Mach3 Turn into completely user friendly product!Features:16:9 ratio adjusted Screenset! Enough with the old-fashioned 1024x768!Large toolpath windowFiles included for CSMIO-IP/S by CS-LabCompletely rebuilt wizards in Conversational tab, including Quick Threads by Poppabear in new look!Settable safe Toolchange Position with one click button and safety, saving time on long and unneeded travels, also usable with M codeLubrication alarm for users with Auto lubrication systemMachine operated (air or hydraulic) collet chuck or jaw chuck opening/closing by one click button, also usable with M code, with displaying current status LEDDistance To Go for visual reference to avoid any crashCurrent Work Offset (G54, G55, G56 etc.) appearance on displayFeed override sliderSpindle override sliderSpindle load monitoring in two ways:* By reading from VFD analog output (0-10V)* By comparing True and Set RPMSpindle Stall detection with LEDOptional Hydraulics/Air compressor On/Off switchFeed per Rev setting by one click buttonConstant Surface Speed (CSS) setting by one click buttonEasy to use separate Offsets window for setting Tool and Work offsetsSeparate window for all coordinate systems (Machine, Axis, Work)M01 Break (Optional Stop) button with LEDIncluded Macro for rotational or linear Automatic Tool Change with logics to go shortest distance, easy to configure for 4-bit encoder or using switchesUser friendly safety logics preventing against crash* Collet Open/Close preventing Spindle Start, Cycle Start* Protection against wrong tool (for example, Tool 0 instead of 1) by warning user with pop-up window* Preventing Cycle Start before homing all axis after Reset* Waiting for Spindle while it spins up to commanded RPM, then allows program to continueConversational part features:Easy-to-use wizardsUsable in both - radius and diameter modeOption to append multiple wizards in one usable G-code fileBrain included:Brain for Collet Signal On/Off (for one pin)Brain for controling Hydraulics (settable Output pin) button on screensetBrain for external Pause and Stop buttonsBrain for Spindle Stall Detection (must use RPM counter on Spindle)Brain for Spindle Load meter, if no Analog Input from VFD (comparing True RPM and Commanded RPM)Brain for Chuck opening/closing safety, so when Spindle is turning, it is impossible to open itBrain for Lubrication alarm (no oil)Currently Screenset is made for Metric users, in few days Imperial version will be ready.Install instructions are on YouTube: https://www.youtube.com/watch?v=emUI7DDnI6kPrice for the Screenset is 25 Eur via PayPal, please write me PM about buying it.