Hello Guest it is March 19, 2024, 01:23:21 AM

Author Topic: Weird V Carve cut  (Read 1676 times)

0 Members and 1 Guest are viewing this topic.

Weird V Carve cut
« on: December 16, 2016, 11:14:46 AM »
When using Vcarve to generate code, I get these rounded pockets where it should be square. Anyone have any suggestions? I am using a standard Frued carbide tipped 60 deg VBit. I attached my tool settings...


Offline Davek0974

*
  •  2,606 2,606
    • View Profile
Re: Weird V Carve cut
« Reply #1 on: December 16, 2016, 12:50:41 PM »
Looks like it is trying to dogbone the corners, does it show on screen or not?
Re: Weird V Carve cut
« Reply #2 on: December 16, 2016, 01:08:33 PM »
Screen, in VCarve and Mach3 show a straight line as you would expect...checked the bit also, it is 60Deg...