Hello Guest it is March 29, 2024, 05:10:17 AM

Author Topic: help needed  (Read 1534 times)

0 Members and 1 Guest are viewing this topic.

help needed
« on: December 01, 2016, 06:37:14 PM »
Hi...hope someone can help...I have a problem with my 3 axis cnc router...
anytime the z axis goes up,followed by a postive direction move in xy at the same time (angle)..xy stalls and loses position..if z is moved down any amount the problem goes away.

I actually made a workaround for rapid travel by moving z down a smidge before any other motion.....problem is now I am  doing some ramp in and out and I am losing position

Offline Tweakie.CNC

*
  • *
  •  9,196 9,196
  • Super Kitty
    • View Profile
Re: help needed
« Reply #1 on: December 13, 2016, 07:51:44 AM »
What make and model of stepper motor controller are you using ?
(a link or picture would be useful).

Tweakie.
PEACE