Hello Guest it is March 02, 2021, 07:01:20 PM

Author Topic: Slow multiaxis feed  (Read 1137 times)

0 Members and 1 Guest are viewing this topic.

Slow multiaxis feed
« on: December 04, 2016, 02:18:51 PM »

The problem is that machine won't reach to g-code feeds. Every time when tool-path changes direction machine slows down. Is there any way to cancel such behavior or is this controller based issue?
Controller is some sort E-Cut controller, pic:  http://imgur.com/a/8P88H
Video of described behavior: https://youtu.be/0NyqkZ0JZpk

Haas has g187 smoothness parameter is there any chance that Mach 3 could have same kind setting?

Best Reagards!
Re: Slow multiaxis feed
« Reply #1 on: December 04, 2016, 09:55:37 PM »
Try putting a G64 at the beginning of your code. In the video the CV mode indicator is not green meaning that you are in exact stop mode.

We never have the time or money to do it right the first time, but we somehow manage to do it twice and then spend the money to get it right.