Hello Guest it is March 29, 2024, 05:20:19 AM

Author Topic: DXF from turbocad  (Read 4127 times)

0 Members and 1 Guest are viewing this topic.

DXF from turbocad
« on: March 17, 2006, 05:31:35 AM »
Hi
Just loaded up easy cam to try.
I currently use sheetcam with Turbocad generated DXF files . I have no problems with the DXF file format in sheetcam but every time I try and load the same files into lazycam I get the microsft porgramme has encounterd an error message. ???

Any ideas

Iain
Re: DXF from turbocad
« Reply #1 on: March 17, 2006, 09:23:28 AM »
Could you please post an example DXF file?
Fixing problems one post at a time ;)

www.newfangledsolutions.com
www.machsupport.com
Re: DXF from turbocad
« Reply #2 on: March 17, 2006, 12:05:06 PM »
Hi
Here is an example that opens fine in Sheetcam
Re: DXF from turbocad
« Reply #3 on: March 17, 2006, 01:10:46 PM »
Do you have mach 3 installed? and in the default directory.


Thats what I was having untill i installed mach3

Jon
Re: DXF from turbocad
« Reply #4 on: March 17, 2006, 01:17:32 PM »
Thanks that was the problem ..wrong directory for Mach 3 ::)

Cheers
Iain