Hello Guest it is November 19, 2019, 11:09:28 PM

Author Topic: Warp9 smoothstepper or XHC smoothstepper  (Read 2174 times)

0 Members and 1 Guest are viewing this topic.

Warp9 smoothstepper or XHC smoothstepper
« on: January 21, 2017, 09:47:40 AM »
Hi everyone,


I was wondering if someone had experience with these boards? Which one is performing better? Is the ESS plugin the extra that makes it better than xhc motion controllers?

I am looking into a new board and smoother motion of my machine at higher fees rates.

Thx,

Stephane

Offline Tweakie.CNC

*
  • *
  •  8,003 8,003
  • Super Kitty
    • View Profile
    • Tweakie.CNC
Re: Warp9 smoothstepper or XHC smoothstepper
« Reply #1 on: January 21, 2017, 10:44:20 AM »
I am probably bias because I use a Warp 9 Smooth Stepper. In it’s favour is the support given by the forum http://www.warp9td.com/index.php/kunena/index and the  multiple tutorials and video’s on the Warp 9 website regarding it’s setup and use.
The ESS can be used with Mach3 and Mach4 and it’s software / firmware is continually being updated to follow the Mach4 developments.

Tweakie.
Success consists of going from failure to failure without loss of enthusiasm.  Winston Churchill.