Hello Guest it is September 27, 2020, 07:25:54 PM

Author Topic: lathe threading problem  (Read 4564 times)

0 Members and 1 Guest are viewing this topic.

Re: lathe threading problem
« Reply #20 on: October 24, 2016, 02:45:37 PM »
hi rich
i have 3 off c3 boards all with problems , i have even sent 2 of them to a friend who is an electronics engineer to see if he could repair them for me  , he found cracked tracks on both & loose items on both boards that hadn't been soldered properly
all the best