Hello Guest it is November 15, 2019, 03:55:14 PM

Author Topic: Need help on VFD connection  (Read 2260 times)

0 Members and 1 Guest are viewing this topic.

Need help on VFD connection
« on: October 27, 2015, 01:09:05 AM »
Hi all, I setup my DIY CNC machine months ago and all works fine, now I'm hopping to hookup my VFD to XHC board so MACH3 can control the spindle speed, the problem here is both VFD & XHC card terminals are using different naming so I'm not sure which is which and how to connect them, I wouldn't want to try as I worry might risk damaging the board or vfd if connect wrongly, their support also not responding any email I sent, so pretty much stuck with current manual control setup.

attached is the pic of the board and vfd terminals, hope guru here can shade some lights, thanks in advance.

Re: Need help on VFD connection
« Reply #1 on: October 30, 2015, 09:41:31 PM »
finally got my answer from xhc, thanks Alex.
Re: Need help on VFD connection
« Reply #2 on: October 14, 2016, 04:17:26 AM »
Hello, Michael,

No thanks. If you have any questions when you are using our card, you can contact me via email. Now you got my email now.

And we have developed our new 5 generation card.

If you got friend would like this, you can recommend this card to them.Thanks