Here is my Mach4 Log From the Homing:
2016-11-28 14:44:44.531 - API: mcAxisDerefAll()
2016-11-28 14:44:44.531 - API: mcAxisDeref() called. axis 0
2016-11-28 14:44:44.531 - API: mcAxisDeref() called. axis 1
2016-11-28 14:44:44.532 - API: mcAxisDeref() called. axis 2
2016-11-28 14:44:44.532 - API: mcAxisDeref() called. axis 3
2016-11-28 14:44:44.532 - API: mcAxisDeref() called. axis 4
2016-11-28 14:44:44.532 - API: mcAxisDeref() called. axis 5
2016-11-28 14:44:44.532 - API: mcAxisDeref() called. axis 6
2016-11-28 14:44:44.532 - API: mcAxisDeref() called. axis 7
2016-11-28 14:44:44.532 - API: mcAxisDeref() called. axis 8
2016-11-28 14:44:44.532 - API: mcAxisDeref() called. axis 9
2016-11-28 14:44:44.532 - API: mcAxisDeref() called. axis 10
2016-11-28 14:44:44.532 - API: mcAxisDeref() called. axis 11
2016-11-28 14:44:44.532 - API: mcAxisHomeAll() called.
2016-11-28 14:44:44.532 - Attempt transition from "Idle" on event "Home" Command.cpp:942
2016-11-28 14:44:44.532 - Signal id 1127, (Jog Enabled), changed from HIGH to LOW.
2016-11-28 14:44:44.533 - S_IDLE_on_exit
2016-11-28 14:44:44.533 - ACION_start_homing
2016-11-28 14:44:44.533 - S_HOMING_on_entry
2016-11-28 14:44:44.655 - ESS: Switching from NORMAL to HOMING_PREP state
2016-11-28 14:44:44.858 - ESS: Switching from HOMING_PREP to HOMING state
2016-11-28 14:44:51.481 - Signal id 66, (Motor 1 Home), changed from LOW to HIGH.
2016-11-28 14:44:51.481 - Signal id 1005, (Y Home), changed from LOW to HIGH.
2016-11-28 14:44:54.335 - Signal id 65, (Motor 0 Home), changed from LOW to HIGH.
2016-11-28 14:44:54.335 - Signal id 1002, (X Home), changed from LOW to HIGH.