Hello Guest it is March 29, 2024, 01:25:09 AM

Author Topic: Mach3 Turn Wizard error - *** Roughing Cut = 0 *****  (Read 3726 times)

0 Members and 1 Guest are viewing this topic.

Re: Mach3 Turn Wizard error - *** Roughing Cut = 0 *****
« Reply #10 on: August 23, 2016, 03:10:46 AM »
Thank you Hood, I will give them a try this evening.
Bizarre error... I am at the point of uninstalling and reinstalling.

Offline RICH

*
  • *
  •  7,427 7,427
    • View Profile
Re: Mach3 Turn Wizard error - *** Roughing Cut = 0 *****
« Reply #11 on: August 23, 2016, 08:23:46 AM »
Hmm............... just fooled with the wizard  and got the same error and "seemed" stuck.

Try just changing some values in the other DRO's and click the Post Code.

Don't have any other suggestions,

RICH