Hello Guest it is April 18, 2024, 01:42:22 AM
Profile Guest
« previous next »
Pages: 1   Go Down

Author Topic: Clear Path stepper/ servo  (Read 7691 times)

0 Members and 1 Guest are viewing this topic.

Offline John252058

*
  • 2 2
    • View Profile
Clear Path stepper/ servo
« on: January 13, 2016, 08:39:54 AM »
I want to build a 3' x 8' bed cnc router. I'm looking for feedback on the Clear Path servo/ stepper motors
Logged

Offline ger21

*
  • *
  • 6,295 6,295
    • View Profile
    • The CNC Woodworker
Re: Clear Path stepper/ servo
« Reply #1 on: January 13, 2016, 11:30:17 AM »
They're supposed to be pretty good.
Logged
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html

Offline BillT

*
  • 9 9
    • View Profile
Re: Clear Path stepper/ servo
« Reply #2 on: May 31, 2016, 06:38:20 PM »
Sorry to be responding so late to this thread...

I built a MechMate router, table size is 6ft x 12 ft with a 10inch Z. I am driving it with ClearPath servos, NEMA 23's. At first I was unsure whether they would work, but sure enough they work fine.

I also recently converted a Bridgeport Series 1 with ground ball screws and of course Clearpath servos, NEMA 34s. They work great as well. I'll be happy to provide more information if needed. I really like this ClearPath stuff.

regards,

BillT
Logged
Pages: 1   Go Up
« previous next »