Hello Guest it is January 23, 2022, 01:44:31 AM

Author Topic: Y axis movement opposite.  (Read 2761 times)

0 Members and 1 Guest are viewing this topic.

Offline Davek0974

*
  •  2,606 2,606
    • View Profile
Re: Y axis movement opposite.
« Reply #10 on: July 16, 2016, 03:31:17 AM »
Yes,

if you think about it, the movement result is identical - the TOOL moves to the same position on the bed mill and the gantry mill, it's our brain that messes things up - with both mills at X0 & Y0, an instruction to go Y100 will send the bed mill table towards you and the gantry will move away from you but both tools will be at Y100

;)

The only way i find to use both machines is to always look at the tool and think where i want it to go, ignore the bed or gantry as one will go the opposite way ;)