Hello Guest it is May 19, 2022, 09:14:26 PM

Author Topic: Positioning problem in mach3  (Read 1246 times)

0 Members and 1 Guest are viewing this topic.

Positioning problem in mach3
« on: July 12, 2016, 02:46:04 PM »
I have positioning problem in mach 3
there is a plasma table with NEMA 23 stepper motors and DM542A .

when I will cut out Components with inner contours is not
centered in the peace as DXF cad.

When I look at the details , it looks like the x-axis is moved between the cutting of inner and outer conturen.

What could I have done wrong . does anyone have any tips ?

///////Jim Persson

Offline RICH

  • *
  •  7,428 7,428
    • View Profile
Re: Positioning problem in mach3
« Reply #1 on: July 13, 2016, 08:13:01 AM »
Just some things to check:
- Confirm  drawing is correct.
- Confirm that the gcode is correct.  ( post your gcode file and someone may backplot it to confirm it agrees with the drawing )
- If the above is ok  then it may be that you are loosing position during a move or it's you machine .....