General CNC Chat > Show"N"Tell ( What you have made with your CNC machine.)

Another Jukebox.

<< < (2/3) > >>

Tweakie.CNC:
Thanks for explaining it all Rich.

As said, I really didn’t know just why I have this obsession but it is all starting to make sense now.

My wife says that "all men should be put onto ‘Prozac’ (Fluoxetine) from the time they come off Mother’s milk" – perhaps this is where I went wrong.  ;D

Tweakie.

Tweakie.CNC:
A little bit of reworking on the acrylic front panel, to allow clearance for the recessed hinges (taking care to avoid the clamps  ;)).

Some more progress on the cabinet which, although it is intended as a ‘wall hanger’, now has an optional table stand. Most of the internal baffles have now been fitted and the whole thing has been given a coat of wood sealer.

Tweakie.

Tweakie.CNC:
The cabinet has now been sprayed and the acrylic panel fitted to the front door.
Next job is to fit the touch screen and make a  start on connecting up the electrics.

Tweakie.

DICKEYBIRD:
Very cool as usual Tweakie; looking good!

Question: Can you explain what this will be used for when you finish?  I get the Jukebox use but I only see 1 speaker cutout.  Is there a satellite speaker enclosure or is it to be a truly period-correct monaural unit for rock-a-billy music? ;D

I'm curious about your electronics widgets as well if you please.

Tweakie.CNC:
Hi DB, thanks for the kind words.

I think that the speaker cutout that you see is for the bass sub-woofer (which is rear facing) and this, in turn, has a downward facing port. There are also a pair of 50mm (downward facing) middle speakers and another pair of 50mm left and right facing stereo speakers. These are driven by a small internal (low power) amplifier but there will be a take off for an external amplifier (if required). There is a panel which fits over all the individual, internal speaker enclosures and those enclosures (except the woofer) should be reasonably air-tight on the inside.

If it all works as intended I shall be well pleased (and possibly amazed) but there are no guaranties as this is all being done off the top of my head. There are no actual drawings or plans and it is just taking shape as I go.


Tweakie.

Navigation

[0] Message Index

[#] Next page

[*] Previous page