Hello Guest it is July 18, 2019, 05:33:42 AM

Author Topic: Help Again  (Read 874 times)

0 Members and 1 Guest are viewing this topic.

Help Again
« on: June 30, 2016, 08:05:24 AM »
I am a newbie and have my 3040 machine all set up now. I have loaded the Gcode and I have the piece of wood on the bed. I have moved the cutter to the corner and I have then clicked each XYZ to 0 . When I click the start cycle it goes back to oo on the bed. How do I save the home to my work piece and not the bed.

Im running mach3

Much appreciated
Kev

Offline Davek0974

*
  •  2,556 2,556
    • View Profile
    • DD Metal Products Ltd
Re: Help Again
« Reply #1 on: June 30, 2016, 10:49:32 AM »
Thats usually a setting the software that generated the g-code, on mine it is anyways ;)
Bridgeport Mill, Mach3 V062, CSMIO-IP/A controller, AC Servo Drives
Re: Help Again
« Reply #2 on: July 02, 2016, 06:26:54 AM »
Hi,
when you zero XYZ does the current work offset reflect that? Can be seen on the 'offsets page'. Should
see also which workoffset is active, most commonly G54.
You may need to include a G54 command at the beginning of your part code.

Craig
My wife left with my best friend...
     and I miss him!