Hello Guest it is March 28, 2024, 04:27:05 PM

Author Topic: Settings screen not active  (Read 1631 times)

0 Members and 1 Guest are viewing this topic.

Settings screen not active
« on: July 01, 2016, 07:36:59 PM »

Using mach3 latest version USB Smooth Stepper. When In open up the setting screen and attempt to use the Axis calibration to set the steps per unit I click on the button and then click any axis I am prompted to enter the distance I enter the distance click OK nothing happens. I pushed the arrow keys to move any axis nothing moves.  Also the reset is not activated. What do I need to do to get he Settings screen to work?
Thanks Bill
Re: Settings screen not active
« Reply #1 on: July 05, 2016, 08:19:09 AM »

Found the problem !!

Had to change the power management in the USB port.