Hello Guest it is December 14, 2024, 04:57:07 AM
Profile Guest
« previous next »
Pages: 1   Go Down

Author Topic: Need help to control the Spindle speed in mach3  (Read 2350 times)

0 Members and 1 Guest are viewing this topic.

Offline Børge

*
  • 22 22
Need help to control the Spindle speed in mach3
« on: June 11, 2016, 01:07:42 PM »
Using a breakoutboard from Ebay: http://www.ebay.com/itm/1pcs-5-Axis-CNC-Breakout-Board-For-Stepper-Driver-Controller-mach3-/201414938686?hash=item2ee544103e:g:GTkAAOxyBjBTWMPR
And a Huanyang 2.2kw VFD.

everything exept the speed Control of the spindle works.
I can start\stop it from Mach3

the BOB regulates the 0-10 volt via mach, but cant get the VFD to regulate

Anyone have done this before and know how to do this

Thanks

Børge
Logged

Offline ger21

*
  • *
  • 6,295 6,295
    • The CNC Woodworker
Re: Need help to control the Spindle speed in mach3
« Reply #1 on: June 11, 2016, 01:20:46 PM »
If your getting the 0-10V to the VFD, then you probably have your VFD set incorrectly.
Logged
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html

Offline Børge

*
  • 22 22
Re: Need help to control the Spindle speed in mach3
« Reply #2 on: June 12, 2016, 12:10:54 PM »
I have ordered a rs485 - usb converter and will try the Huanyang VFD plugin

Børge
Logged
Pages: 1   Go Up
« previous next »