Hello Guest it is March 28, 2024, 07:39:58 PM

Author Topic: OEM button can't work in M99999 program  (Read 1185 times)

0 Members and 1 Guest are viewing this topic.

OEM button can't work in M99999 program
« on: May 29, 2016, 11:01:32 AM »
Hi everyone,

i designated number1037 to an oem button, vb script has a simple program to toggle its LED to turn ON and Off.

If it is allocated in macropump program, i press this button on the screen, a simple program (a testing IF cause) in macropump program has response and also, the screen LED toggles.

However, when i put this testing IF cause inside the M9999 program. Actually, this a subroutine program calleĆ° by a toolchanger program M6start. When i entered M6T1 in the MDI entrance, toolchanging operations proceed until to this testing IF cause. Actually, i made a looping on this IF cause, it seems that it still can detect the state of this 1037 button. But, on the screen, i am no longer able to toggle this button, nor the LED changes the state. The program cannot link with it..

It seems that i designed this button can only work on macropump program but not in toolchanging program....Are there any solutions or did i mess up something?

Thanks in advance.