Hi all,
Quick question(s)
I'm gonna convert a smallish vertical mill I have (AEW Viceroy Horizon) to Mach 3 control. I am NOT an electrician, so help would be gratefully received
! first off, I have converted an Orac to Mach 3 which I am very pleased with, now I want to convert the manual mill to Mach3.
I have the ball screws 32mm diameter, these need machining to suit and I have some steppers to control the axis, the steppers are MAE HY200-4266-34 A8, 200 steps/rev, 4 steps, 3.4a/phase. I believe these are still available, there is a catalogue listing these online, I have drives, but cant find anything on them except Harting 09 04 032/692/1 which I think are just the multi pin connectors for the drives.
So, if I cant understand the drives, what drives shall I use? the motors are hybrid steppers with 8 wires and can be wired uni-polar, bi-polar parallel or bi-polar series.
The Orac has 2 printer ports to the PC, shall I use the same set up, or would anyone recommend an alternative?
thank you for taking the time to read my post, any help of course would be gratefully received!
Best Regards,
Wayne